View Full Version : Knock table only produces all 0s all the time
louis
October 16th, 2007, 12:21 AM
Hello.
Does anyone know why I am getting 0s only in my knock table? There is no way I am in 0s when I see some of the main ve wanting 25% more or less fuel in areas. I have increased the spark table beyond what I feel is acceptable and I even go the other way with the spark table and still 0s.
I do not hear any knock under all these circumstances also. Am I suppose to be adjusting the sensitivity of the knock sensors or something to make this work?
Thanks Louis
joecar
October 16th, 2007, 07:12 AM
Could be your knock sensors may be not working.
Usual test for this is to tap a suitably large wrench/spanner on the head/block while engine is running and see if KR is observed (keep your body/tools out of moving parts); this test may or may not be conclusive.
driver456
October 16th, 2007, 10:12 AM
Mine was doing the same thing,All zero's with a few .7,.8,.2 knock retard showing,But it didn't jive with my logging,So I just highlighted in the log only the KR and then I went back to my map and only what I highlighted showed up and it matched the KR I highlighted.So I copied and then paste and subtract in my timing table and it worked perfect.Hope that that helps anybody with KR:D I don't know if anybody did it that way before,But it worked for me.I just went back and looked at my KR and I highlighted alittle before and alittle after the highest part of the spike,That seemed to work out better.Some of it is ramping out I guess.................Paul
louis
October 18th, 2007, 12:41 AM
Hello.
On the ls1 we have 2 knock sensors. It seems odd to me both would not work at the same time.
I will try to tap on the intake and see if I can record any knock.
Will keep you up to date.
Thanks
Louis
joecar
October 18th, 2007, 02:10 AM
Tap directly on head or block.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.