View Full Version : Scanning On Startup
Dale
November 7th, 2007, 02:21 PM
I'm having some problems getting my new setup to work. Will this program scan and record while starting so that I can post the recording and get help?
joecar
November 7th, 2007, 03:14 PM
Yes... key on, connect to vehicle, enter PCM type, enter VIN/OS, select pids, goto dash page (gauges or charts), press red button to start recording, key start.
Dale
November 7th, 2007, 03:18 PM
Thanks for response
I havent scanned with this program before, what are PIDS? I am use to turnerprort on OBD1 system.
joecar
November 7th, 2007, 03:44 PM
PID's are the same as OBD-I parameters that you can log/view.
After connecting to vehicle, press the Validate PIDs button;
then go to the PIDs F8 tab, and double click on the ones that you want to log.
Dale
November 7th, 2007, 04:03 PM
I figured it out. Thanks
PIDS=Points of Intrest in my lingo.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.