PDA

View Full Version : Need help PCM lost



ripmf666
November 8th, 2007, 10:41 PM
Heres what im getting trying to load tune in from my efi live

05:04:15.015: Scanning for EFILive FlashScan V2 USB
05:04:15.265: Current protocol set to: "ISO 15765 CAN"
05:04:15.312: Interface firmware version: 2.4.61
05:04:15.343: Interface firmware model: FS2
05:04:15.375: Interface firmware version: 2.4.61
05:04:15.390: Interface firmware date: Jul 24, 2007
05:04:15.406: FlashScan serial number: 003610363660
05:04:15.421: FlashScan license number: 003610363660
05:04:15.453: Disconnecting ...
05:04:15.500: Disconnected
05:04:16.046: Scanning for EFILive FlashScan V2 USB
05:04:16.281: Current protocol set to: "ISO 15765 CAN"
05:04:16.328: Interface firmware version: 2.4.61
05:04:17.953: Current protocol: "ISO 15765 CAN"
05:04:17.984: Interface firmware model: FS2
05:04:18.015: Interface firmware version: 2.4.61
05:04:18.031: Interface firmware date: Jul 24, 2007
05:04:18.062: FlashScan serial number: 003610363660
05:04:18.078: FlashScan license number: 003610363660
05:04:19.734: Current protocol set to: "ISO 15765 CAN"
05:04:19.781: Interface firmware version: 2.4.61
05:04:21.437: Getting status...
05:04:22.015: Status: Calibration missing.
05:04:27.312: Preparing ECM for reflash...
05:04:27.359: ECM seed is: $4D8C
05:04:27.750: Initializing ECM...
05:04:28.875: Request GM operating system...
05:04:28.921: GM operating system: 0
05:04:29.500: Request serial number...
05:04:30.375: Reflashing ECM's memory...
05:04:32.437: Erasing ECM flash memory... (please wait up to 45 seconds)
05:04:33.312: ECM flash memory erased OK
05:04:33.406: Error: Failed. Controller has returned to normal operation, please retry the operation.
05:04:33.406: Reflash failed, aborting...
05:04:33.421: Total time: 00:00
05:04:33.421: Data compression achieved: 0.0%
05:04:33.437: Attempting to reboot ECM... (please wait up to 8 seconds)
05:04:34.593: ECM has booted successfully...
05:04:35.609: Clear emisison related DTCs...
05:04:37.203: Current protocol set to: "ISO 15765 CAN"
05:04:37.265: Interface firmware version: 2.4.61
05:04:38.093: Clear DTCs for all modules...
05:04:39.671: Current protocol set to: "ISO 15765 CAN"
05:04:39.718: Interface firmware version: 2.4.61
05:04:40.843: Reflashing completed successfully
05:04:43.609: Done!

joecar
November 9th, 2007, 04:17 AM
Are you saying that it failed to flash...?

I pm'd Tech Support.

ripmf666
November 9th, 2007, 08:55 AM
took out one program and went to load stock file and would not load truck is acting like there is no vin in pcm now and no gm OS.

joecar
November 9th, 2007, 09:12 AM
I take it truck will not start...

leave battery connected;

pull PCM/ECM fuse for 1 minute and then reinstall;

see if truck starts now.

wait4me
November 9th, 2007, 02:24 PM
The pcm has been erased, but in the middle it looks like another module tried to talk and reset itself and the other modules during that process.

You need to pull the fuses for your aftermarket radio and try it again. that is if you have an aftermarket radio.