New Nitrous Panel and Gauge setup...

[Beer99C5]

Decided to change things up a bit, I got a Trick Performance V series gauge/controller to add safeties to my Nitrous setup. I created a new panel from lessons learned this year, LOL the major change is the stage indiction lights in the ashtray area...pretty useless, so I moved those to the pillar pod.

Anyways just wired it up and got everything workin...

Here are some pics.

New Gauges in Place

http://www.retrorelics.net/jim/Boards/Corvette/BlackGainstalled.jpg

New Nitrous Panel...deleted the gauge power switch the EFI tune switch (hard-wiring that to be automatic tune switching), deleted the heater (Heater is controlled by the new Trick Performance Black Gauge), moved the LC-1 Cal button to cab vice the engine bay.

http://www.retrorelics.net/jim/Boards/Corvette/BlackGapanel.jpg

Cleaned up the wiring on the back side of the new panel :cool:

http://www.retrorelics.net/jim/Boards/Corvette/BlackGapanelback.jpg


Here is the new gauge with the WB inputs and Bottle Pressure readout :cheers:

http://www.retrorelics.net/jim/Boards/Corvette/Vseries2.jpg

You can switch the display to AFR only (Fuel Pressure, Boost, or other) as well. You can configure the Gauge to fire the nitrous only when within safe AFR's.

[mr.prick]

nice setup :)

[joecar]

:cheers:

[Doc]

As always, top shelf stuff! Bravo Zulu.