lastcall190
November 18th, 2007, 04:24 PM
So I think I finally... get it. So I set up my table like this:
http://forum.efilive.com/attachment.php?attachmentid=2326&d=1195442197
So I logged from cold start up (car hadn't run all day, let it idle until needle was right below halfway, where it settles in when I drive the car and it warms up). I stopped and got the cell count. It didn't make much sense until I rolled the cursor over the cell and saw "Average". So I changed the values to averages, and BAM, now it looks familiar. So I copied with labels, went into B4307, and pasted and added (right?). I came up with this:
http://forum.efilive.com/attachment.php?attachmentid=2327&d=1195442498
I've read from this thread: http://forum.efilive.com/showpost.php?p=45554&postcount=4
That what I am shooting for is logging and coming up with averages of ZERO? Is this correct? I am gonna do this quite a few more times and see what I can come up with. Any suggestions or flawed logic pointed out is appreciated. Thanks.
-J
http://forum.efilive.com/attachment.php?attachmentid=2326&d=1195442197
So I logged from cold start up (car hadn't run all day, let it idle until needle was right below halfway, where it settles in when I drive the car and it warms up). I stopped and got the cell count. It didn't make much sense until I rolled the cursor over the cell and saw "Average". So I changed the values to averages, and BAM, now it looks familiar. So I copied with labels, went into B4307, and pasted and added (right?). I came up with this:
http://forum.efilive.com/attachment.php?attachmentid=2327&d=1195442498
I've read from this thread: http://forum.efilive.com/showpost.php?p=45554&postcount=4
That what I am shooting for is logging and coming up with averages of ZERO? Is this correct? I am gonna do this quite a few more times and see what I can come up with. Any suggestions or flawed logic pointed out is appreciated. Thanks.
-J