Need to lock e38

[CBM]

Well I have been tuning for some time on a completely different computer and software for the aftermarket . I sell engine packages and need some help. I'am selling speck ls2,and 7 engines and have to lock my cal's. So any suggestions? If I can't lock the ecm I will be left with having to remove the communication pins from the ecm . Any help would be great !!!

By the way dose any one have a stock eng cal for a e38 with boost
for a ls7, or a e38 with the mass airflow ve tables done for a ls2

thanks for your help Chris :help2:

[wait4me]

Chris Call me when you get a chance. I can walk you thru how to lock the controller so no one can get into it. "Really simple"

Dont cut the pins off the ecm. Then the customers would not have scan tool capabilities. As for e38 with boost. Several of us on the board here have tuned and set up the e38 to handle boost. It is really simple actually as the ecm itself is already set up to handle it.. E67 computers are mainly used for boosted cars like the stsv and ctsv, xlr ect...