PDA

View Full Version : LB7 Oil Pressure logging



GMPX
December 5th, 2007, 11:22 AM
Hi All,

Attached is an updated gm_enhanced file that includes a new DMA PID to log the Oil Pressure on the LB7. Also, the incorrect imperial scaling for the LLY+ Oil Pressure PID has been fixed.
The new PID's have not been confirmed to be accurate on a vehicle as yet but feel free to download the zip file and provide feedback (LB7 onwers in particular).

Extract the attached zip in to the directory shown below.
\Program Files\EFILive\V7\Configuration

The new LB7 Oil Pressure PID is called - GM.LB7_OILPRES_DMA "LB7 Oil Pressure"

EDIT:
If you can't get the attachement, download the file HERE (http://efidownload.iqd.co.nz/software/GMPX/gm_enhanced.zip) instead.

Cheers,
Ross

malibu795
December 5th, 2007, 12:36 PM
i down loaded it and un ziped it... but i can not read the file..


i think i am missing som basic compytore skills :frown:

GMPX
December 5th, 2007, 01:15 PM
Can't read it?
You just need to unzip it in to the directory specified above, or, is the PC saying the file is not valid?

Cheers,
Ross

malibu795
December 5th, 2007, 02:33 PM
Can't read it?
You just need to unzip it in to the directory specified above, or, is the PC saying the file is not valid?

Cheers,
Ross
invalid or corupted

CntrlCalDmax
December 5th, 2007, 04:03 PM
The zip file tells me to insert the last disk of a multi-volume set and click OK.

malibu795
December 5th, 2007, 04:04 PM
The zip file tells me to insert the last disk of a multi-volume set and click OK.
i got one disc when i purchased V1 from guy trip

CntrlCalDmax
December 6th, 2007, 02:19 AM
I downloaded again and it errors with:

Windows cannot open the folder.
The compressed (zipped) folder C:\users\........\gm_enhanced.zip is invalid.

JoshH
December 6th, 2007, 09:25 AM
The zip file tells me to insert the last disk of a multi-volume set and click OK.
I get the same message.

GMPX
December 6th, 2007, 09:36 AM
I just put a download link in the first post to download the file directly, not from the forum as an attachment. See how that goes for you all.

Cheers,
Ross

malibu795
December 6th, 2007, 02:39 PM
i got this after i closed and opened the system
Error report generated by EFILive at 18:38:22 on Dec 06, 2007

Error code: ERR_CONFIG/92
C:\Program Files\EFILive\V7\Configuration\gm_enhanced.prn(130 5): Units gms not found. .

EFILive Version: 7.4.2 (Build 534)

Platform: Windows XP
Version: 5.1 (build 2600)
Processor type: Pentium 1729MHz

Directories
Temporary Cache: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Temporary cache
Logged Data: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Logged data
Customers: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Customers
Configuration: C:\Program Files\EFILive\V7\Configuration
Exported Data: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Exported data
Images: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Images
Sounds: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Sounds
Maps: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Maps
Pids: C:\Documents and Settings\Adam\My Documents\EFILive\V7\PIDs
Virtual Dash: C:\Documents and Settings\Adam\My Documents\EFILive\V7\VDash
Print Reports: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Print reports
Bug Reports: C:\Documents and Settings\Adam\My Documents\EFILive\V7\Bug reports

Connected: No

Auto connect: No
Scan OBDII info: No

Error retries: 1
Retry delay: 10
Message throttle: 0

Most recently used VIN: 1GCHC23142Fxxxxxx (Note: 1)

PCM information
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Stream-Slow scan mode: Unknown
Stream-Fast scan mode: Unknown
Maximum dynamic packets: Unknown

Most recent communication with vehicle:

Report ID: 155319 (Note: 2)

Notes:
(1) The VIN sequence number is not required for this report and for your privacy it is NOT included in this report.

(2)The report ID is a checksum of the report text and is used to verify the integrity of the report.

JoshH
December 7th, 2007, 05:22 AM
It's working correctly for me now on my 06.