Who has completed AutoVE

[Gelf VXR]

Thought I'd post a poll to see how many peeps have succesfully completed the AutoVE process on their LS PCM?

[OLS108]

I still have my L plates on at this point.. just reading and learning...

[SV8346]

yeah i'm the same, still very much so on learners plates.

[5.7ute]

I had it all within 1% until the cam install. Now I am back to within 2% in most cells. (New speed limits wont let me get the higher rpm/ map cells)
Welcome to the forum Dave ( OLS108 )

[vatman02]

I've been doing mine, for what seems like, forever. Well, over a year anyway, it never seems to settle down. I get within 1-2% then the next day it would be all out of wake. I switched to a smaller injector, then i lowered the whole table by 20% and everything was back at 1-2%. Weird.

[OLS108]

I had it all within 1% until the cam install. Now I am back to within 2% in most cells. (New speed limits wont let me get the higher rpm/ map cells)
Welcome to the forum Dave ( OLS108 )
Good to be here, so much good info, just trying to get my head around it all.
Dave

[oztracktuning]

Temperature correction is needed to get it to settle. You can play with ECT/IAT blending and even the Baro correction for altitude changes.

[Goldfinger911]

I was an EFILive newbie 6 months ago, spent a few months learning then started AutoVE. Took a month off and on to get it, and now I have things very close around 1% in most cells.

One thing I will recommend is the spread sheet (I forget who wrote it) that does the interpolation for you based on a % factor that you chose. Makes it really easy to avoid the spikes that can pop up every so often. I did AutoVE by the book first, then with a 90% factor, 80%, 70%, and 60%. It looks really good now.

I can post it is anyone needs it. It is somewhere on this forum as well.

[joecar]

What if someone has done AutoVE on multiple vehicles (of different types, or of the same type)...?

[BlackGMC]

I have got mine within 1% on my 4.8....

[RonC]

I have done it on my 6.0L in SD and it is workiing very well.

[hquick]

I don't think I'll ever get done with it. I'm thinking of making a career of it!

[BlackGMC]

I don't think I'll ever get done with it. I'm thinking of making a career of it!
http://smiliesftw.com/x/werdrun_2.gifhttp://smiliesftw.com/x/squintnoeswerdrun.gifhttp://smiliesftw.com/x/werdrun_2.gifhttp://smiliesftw.com/x/squintnoeswerdrun.gifhttp://smiliesftw.com/x/werdrun_2.gifhttp://smiliesftw.com/x/squintnoeswerdrun.gif

[JezzaB]

Done it quite a few different times on LS1's and again after different mods. Doing it on the street is good but takes a fair while (and you cant hit all load point and is bloody scarey with FI!) but doing it on the dyno saves soooooooo much time!

Jez

[Gelf VXR]

Finally started AutoVE on my LS2 last weekend:cheers: