PDA

View Full Version : LBZ PID Selection



Donovan
December 27th, 2007, 07:18 AM
I have modified the options.ini to read as follows:

; __________________________________________________ _______________________
*PSL_LBZ
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
ECM, ECT, 0:110:1:1:0
ECM, MAP
ECM, RPM, 0:4500:2:1:0
ECM, VSS
ECM, IAT
ECM, MAF
ECM, BARO
ECM, FRPDES
ECM, FRP_C
ECM, MNINJTIM
ECM, MAIN1Q_DMA
ECM, MAIN1T_DMA
ECM, PILOT1Q_DMA
ECM, PILOT1T_DMA
ECM, TCVPOS
ECM, APP

Then logging on my vehicle, I have noticed that the FRPDES, MNINJTIM and some of the other GM specific PIDS do not log. Is there a trick to get these working or is this by design? I attached the log file from my test.

Also, is there a way to remove the analog input PIDS? I am not using these currently so if they were removable I would take them out to reduce the extra columns.

Other than the issue with the extra PIDS the logging seems to work great!\

BTW, I am running FW version: FSProgV2_05_15(19)

TAQuickness
December 27th, 2007, 07:48 AM
I'm not 100% sure, but I think the PID definitions are the *.pmm files and cannot be edited at this time.

I'm sure Paul will chime in momentarily to clarify.

Donovan
December 27th, 2007, 07:51 AM
Strange, as I noticed that I was able to add ECM, FRP_C without issue.

Blacky
December 27th, 2007, 11:54 AM
Right now I have not added all the PIDs in. You can see which PIDs are available for each PCM type by looking the *.txt files in the EFIlive_Hapi/Pid descriptions folder.

See the Readme.txt file in that older for more instructions on changing the PID selections.

This is only a temporary setup during beta testing. Once the bugs are ironed out of BBL, I will add in the rest of the PIDs and a user interface will be available to allow you to select/configure PIDs and other BBL details.

Regards
Paul