Transmission control on dyno

[SweetS10V8]

Im new to using EFILive, and had a car on the dyno today and couldnt for the life of me get the trans to do what I wanted it to.

I want to lock it into 3rd gear and lock the TCC so I can make a pull from fairly low speed 2500rpm or so. Can anyone give a quick rundown of parameters to change so I can see if Im missing something??

[limited cv8r]

you can do all of that from the BIDI control panel

[Biggsy]

you can do all of that from the BIDI control panel

In the scan tool ;)
(New user)

[SweetS10V8]

I think I found it....I found another thread that dealt with this.


Howard,

These buttons, and the menu items under Bidirectional would stay greyed out unless I first go File->Select Controller and enter the PCM type.

Joe

[SweetS10V8]

OK, So I got it to let me into the screen (F5) and into the Transmission section.

It had a place to select a gear and enagble the TCC. I did both and it still unlocked when I went to full throttle??

Edit: Figured it out. I thought it was a setting and not a live deal so I was clicking what I wanted then closing the screen. So I had my wife co-pilot and had her shifting gears and locking the TCC on the fly.

Note to self: Keep the screen open