View Full Version : Transmission control on dyno
SweetS10V8
December 29th, 2007, 04:47 PM
Im new to using EFILive, and had a car on the dyno today and couldnt for the life of me get the trans to do what I wanted it to.
I want to lock it into 3rd gear and lock the TCC so I can make a pull from fairly low speed 2500rpm or so. Can anyone give a quick rundown of parameters to change so I can see if Im missing something??
limited cv8r
December 29th, 2007, 06:17 PM
you can do all of that from the BIDI control panel
Biggsy
December 29th, 2007, 09:17 PM
you can do all of that from the BIDI control panel
In the scan tool ;)
(New user)
SweetS10V8
December 30th, 2007, 05:39 AM
I think I found it....I found another thread that dealt with this.
Howard,
These buttons, and the menu items under Bidirectional would stay greyed out unless I first go File->Select Controller and enter the PCM type.
Joe
SweetS10V8
December 30th, 2007, 07:56 AM
OK, So I got it to let me into the screen (F5) and into the Transmission section.
It had a place to select a gear and enagble the TCC. I did both and it still unlocked when I went to full throttle??
Edit: Figured it out. I thought it was a setting and not a live deal so I was clicking what I wanted then closing the screen. So I had my wife co-pilot and had her shifting gears and locking the TCC on the fly.
Note to self: Keep the screen open
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.