MoTruck
January 28th, 2008, 06:40 AM
I have a couple of questions that hopefully someone can help me sort out. I have an LM1 hooked up to log with Efilive. I added an additional bung right next to the front stock 02 sensor. When I log in closed loop, the lm1 readout reads approximately 14.5. The readout in Efilive is slightly higher. I set the extra voltage out on the LM1 to a constant 2.0 volts. The voltmeter I have reads the output at the orange connector as 1.98 volts. What do I need to do, to ensure that Efilive is recording an accurate reading? Thanks, Motruck
The truck is a 2006 2500hd, 6.0L
The truck is a 2006 2500hd, 6.0L