PDA

View Full Version : Missing parameters in calibration???



mrrattle
February 1st, 2008, 05:14 PM
I was just tuning on a 2008 silverado with E38 ecm. I dont see settings for the trans and axle torque limiters (settings are not in the trans calibration either).

Trans input max
trans output max
front axle max
front propshaft max
rear axle max
rear propshaft max

also the BRAKE TORQUE max table is missing

basically b0503 through b0514 and table b0704

any chance i missed it, or just have to wait for calibration updates?

Redline Motorsports
February 2nd, 2008, 02:28 PM
Make sure you have the latest software version.

Howard

mrrattle
February 3rd, 2008, 06:11 AM
is there something newer than??

software version 7.5.3(build 35)
and
calibration version 7.10 december 20, 2007

ScarabEpic22
February 3rd, 2008, 09:56 AM
I have 7.5.3 build 36 on my computer, run the update program and download the latest update. :)

mrrattle
February 3rd, 2008, 05:26 PM
already have build 36, 35 above is typo, and that wouldnt help anyway, parameters are contained in calibration files not the main software.

ScarabEpic22
February 3rd, 2008, 06:46 PM
already have build 36, 35 above is typo, and that wouldnt help anyway, parameters are contained in calibration files not the main software.
sorry then, i dont have any other suggestions.