PDA

View Full Version : e38 auto tuning



hymey
February 3rd, 2008, 03:59 AM
Hi guys.

How do I setup a calc.pid(actual afr vs commanded) map for e38 virtualVE tuning.

I understand I have to have the calc.pid as the data and the MAP and rpm in the columns and rows just not sure how to setup the correct calc.pid?

I have read on here that some of you guys have done it. Just nothing in detail.

Cheers

Joel

hymey
February 3rd, 2008, 04:18 AM
can I use the B0101 MAIN VE TABLE - LM1 WB.BEN(cell count).

Will this map work. It is in the pid selection in version 7.5.3/

Cheers

Joel

Redline Motorsports
February 3rd, 2008, 12:53 PM
Joel,

Since there is no true VE table, you have to use the VVT that is provided by LIVE. Copy and paste the labels from that table to make your new map. Then you can use the BEN factor calc pid to log your correction.

Howard

hymey
February 3rd, 2008, 04:36 PM
Thanks mate. Is the BEN factor calc pid in the software standard.???