PDA

View Full Version : AutoVE PID's??



Gelf VXR
February 29th, 2008, 06:48 PM
AutoVE not possible with BB logging, no BEN's pids available

TAQuickness
March 1st, 2008, 10:17 PM
AutoVE will be very much possible. BEN's and other user defined PID's can be added to any log (on the PC side) after the fact.

Gelf VXR
March 1st, 2008, 11:08 PM
AutoVE will be very much possible. BEN's and other user defined PID's can be added to any log (on the PC side) after the fact.

Can you explain how you add a PID to a log file after the event, surely it must be pre selected in order to log it?

joecar
March 2nd, 2008, 08:28 AM
While viewing the log in the scantool, under the PIDs F8 tab select the calc pid(s) that you want
(you must have already logged the non-calc pids required by the calc pid(s);
rightclick->More Info shows what pids are required)...

then press the replot button and save the log, and add the calc pid to the dash/chart display.

Only calc pids can be added.

Gelf VXR
March 8th, 2008, 01:50 AM
While viewing the log in the scantool, under the PIDs F8 tab select the calc pid(s) that you want
(you must have already logged the non-calc pids required by the calc pid(s);
rightclick->More Info shows what pids are required)...

then press the replot button and save the log, and add the calc pid to the dash/chart display.

Only calc pids can be added.

GM.AFR_B is required to be logged by BB to be able to AutoVE on the E40 LS2.