PDA

View Full Version : A new angle (crank that is)



Spindoctor
March 13th, 2008, 06:11 AM
2005 GTO LS2 E40 ECM.
My 'Crank Learn' function is grayed out.
I have a code P0315A and need to run this procedure.
The ECM has an LS2 Edit tune on it and is currently 'Locked'.
Would this prevent me from running the relearn or am I not doing it right.
I have been looking at the instruction manual on page 153 and do not see anything specific to the LS2. I assume that means it is the same procedure
for all models.

What am I missing?:nixweiss:
Currently running version V7.4.2 (Build 644)

joecar
March 13th, 2008, 06:33 AM
I pm'd Tech Support.

Blacky
March 13th, 2008, 07:14 AM
Bi-directional controls are not available for LS2 in the current EFILive version. CASE learn is a bidirectional control and is therefor not available for the LS2 yet. A beta version of EFILive V7.5.4 will be released in the next week or two that has the bidirectional controls in it for the LS2 (including CASE learn). Regards Paul

Spindoctor
March 13th, 2008, 07:46 AM
That explains all that!
I will see if I can dig up a Tech II somewhere.
Thanks!