PDA

View Full Version : Hanging idle on stock LS7



Stoichiometric
March 21st, 2008, 04:26 AM
I have been trying to reuce a small amount of hanging idle on a 2006 LS7. I cannot find the familiar throttle follower decay and delay tables in the calibration. The car is stock except for the air filter and bridge. The MAF calibration is pretty close, LTFTs are minimal. Any ideas?

hymey
March 21st, 2008, 07:37 PM
Try reducing the minimum idle airflow. It is found under Airflow--->idle.

Look at the cells where it is idling. Try taking 100 of each of these until it stops.