PDA

View Full Version : where to get a 5 position switch



69camaro5speed
March 23rd, 2008, 03:55 AM
where is every one finding the switches they are using for the dsp5. i though i could find it here i give lol so funny so much info but some how i miss the little stuff. unless evey one goes to radio shack and buys 5 resistors and wires it all up ?

kbracing96
March 23rd, 2008, 07:51 AM
http://www.socaldiesel.com/2EFILive.htm

69camaro5speed
March 23rd, 2008, 08:31 AM
thanks i went there didn't see it befor

Trippin
March 24th, 2008, 03:52 AM
Scroll to the bottom of the page.

69camaro5speed
March 24th, 2008, 04:14 AM
found it thanks

wait4me
March 24th, 2008, 04:51 AM
Also The newest V2 update controls the new switching system that allows you to not have to run a switch anymore. The V2 unit itself will be the switch. You just plug it in the dash and press change tune and it flips to another program instantly on the fly. The customer would just need a V2 unit. Scan only or tune will both work as long as it is a v2.

69camaro5speed
March 25th, 2008, 03:12 PM
is that out now

GMPX
March 25th, 2008, 05:47 PM
No, will probably be in Beta by next week.

Cheers,
Ross

Banshee1973
April 5th, 2008, 04:15 PM
So why would this be easer to use then a stationary switch.

wait4me
April 6th, 2008, 02:36 AM
You dont have to run any wires at all, no cutting holes in the dash to plant a switch, no pulling connectors apart and putting them back together. When you want to change a tune you just press one button on the v2.. Simple.

GMPX
April 6th, 2008, 11:17 AM
FYI, the delay to release this is still wanting to get the Black Box Logging firmware in a stable state for all to use (single users and workshops), the BBL firmware is required for the switching function.

Cheers,
Ross