PDA

View Full Version : E67 missing PIDS from new Beta?



scdyne
March 23rd, 2008, 10:39 AM
E67 controller ?
It's not listed under "Select Vehicle" so I modified my Options.ini

But it wouldn't show up for anything. Is the list limited to 14 items only?

I just removed them all and made my own list of custom PSLs for my car.

Then I wanted to add some pids, but the auto generated E67_PIDs.txt contains only MONDTC and the FlashScan V2 hardware inputs/outputs.

E67.pmm Size = 3.46kb

Can I just hijack the E38.pmm and pretend/assume all is good?

also in the E38_PIDs.txt for the E38.pmm is found this:



INPHAB2 [1] Intake Cam Phase Actual Angle Bank 2 (°)
EXPHDB1 [1] Exhaust Cam Phase Desired Angle Bank 1 (°)
INPHDB1 [1] Intake Cam Phase Desired Angle Bank 1 (°)
EXPHDB2 [1] Exhaust Cam Phase Desired Angle Bank 2 (°)
INPHDB2 [1] Intake Cam Phase Desired Angle Bank 2 (°)
EXPHEB1 [1] Exhaust Cam Phase Error Angle Bank 1 (°)
INPHEB1 [1] Intake Cam Phase Error Angle Bank 1 (°)
EXPHEB2 [1] Exhaust Cam Phase Error Angle Bank 2 (°)
INPHEB2 [1] Intake Cam Phase Error Angle Bank 2 (°)


What/which one (where) is supposed to be:
Intake Cam Phase Actual Angle Bank 1 (°)
Exhaust Cam Phase Actual Angle Bank 1 (°)

So far using the E38.pmm I'm having good success with the stuff I know to be in the E67, but how much of the E38 is the same as the E67? I'm assuming most if not all? hopefully..

Blacky
March 23rd, 2008, 10:44 PM
E38 and E67 PIDs should be very similar. I'll get the E67 PID list updated asap.
I'll also look into the cam angle PIDs.

Regards
Paul

Blacky
March 24th, 2008, 05:18 PM
I accidentally left off a few cam PIDs, I have added them in.
Regards
Paul