PDA

View Full Version : Dyncylair_m



joecar
March 27th, 2008, 10:30 PM
DYNCYLAIR_M is displayed by V2, but the scantool doesn't show DYNCYLAIR_DMA selected...

How do I link them...?

Here is my Options.ini file:



; __________________________________________________ _____________________
; | |
; | Copyright © 1999-2007 |
; | EFILive Limited |
; | web: http://www.efilive.com |
; | email: info@efilive.com |
; |_________________________________________________ ______________________|
;
; Modifications
; __________________________________________________ _______________________
; Version | When | Who | Why
; __________________________________________________ _______________________
; 8.0 | 2007-Feb-16 | PSB | Created file
; __________________________________________________ _______________________
;
; __________________________________________________ _______________________
*VEHICLES
;
;Vehicle selection list
;----------------------
;
; Cap1 and Cap2 form the "on-screen" display option from which the user may select.
; Controllers lists 1 or 2 "&" seperated pid memory map (*.pmm) files.
; PSL is the PID Selection defined later in this file
; PCU is the PID Custom Units defined later in this file
;
;Cap1 Cap2 Controllers (Engine&Trans) PSL PCU
;------- -------- -------------------------- ---------- --------
A PIDs, A, LS1B_A.pmm, PSL_A, PCU
B PIDs, B, LS1B_A.pmm, PSL_B, PCU

; __________________________________________________ _______________________
;
; PID Selection List
; ----------------------
;
; Node: Is one of PCM, ECM or TCM (use "-" for external PIDs).
; PIDs: Is one or more "|" seperated PID names. The first valid PID will be used.
; Alarm: Is 5 ":" seperated fields:
; min: Minimum value, below which the alarm will sound.
; max: Maximum value, above which the alarm will sound.
; style: Is one of:
; 0 = No sound, No LEDs
; 1 = Low pitch
; 2 = Medium Pitch
; 3 = High Pitch
; 4 = Very high Pitch
; 16 = Illuminate LED 1
; 32 = Illuminate LED 2
; 48 = Illuminate LED 3
; 64 = Illuminate LED 4
; 80 = Illuminate LED 5
; Add Pitch and LED values together to enable audio and visual alarms.
; For example, for Medium Pitch and LED 4, use 2+64 = 66
; time: Time (in 10ms increments) for which alarm will be sounded.
; hold: Time (in seconds) for which the displayed value will be frozen (not implemented yet).
;
; __________________________________________________ _______________________
*PSL_A
;
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
PCM, TP
PCM, DYNCYLAIR_M
PCM, MAF
PCM, DYNAIR
PCM, GEAR
PCM, ECT, -40:110:1:1:0
PCM, RPM, 0:6500:2:1:0
PCM, EQIVRATIO
PCM, HO2S11
PCM, HO2S12
PCM, HO2S21
PCM, HO2S22
PCM, SPARKADV
PCM, IAT
PCM, MAP
PCM, KR, 0:10:97:1:0
PCM, TCCMODE
PCM, MFTOTAL
PCM, VSS
-, WO2LAM1
-, WO2LAM2
-, WO2AFR1
-, WO2AFR2


; __________________________________________________ _______________________
*PSL_B
;
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
PCM, TP
PCM, MAF
PCM, GEAR
PCM, ECT, -40:110:1:1:0
PCM, RPM, 0:6500:2:1:0
PCM, EQIVRATIO
PCM, HO2S11
PCM, HO2S21
PCM, SPARKADV
PCM, IBPW1
PCM, IBPW2
PCM, IAT
PCM, MAP
PCM, LONGFT1
PCM, LONGFT2
PCM, KR, 0:10:97:1:0
PCM, TCCMODE
PCM, MFTOTAL
PCM, VSS
-, WO2LAM1
-, WO2LAM2
-, WO2AFR1
-, WO2AFR2


; __________________________________________________ _______________________
;
; PID Custom Units
; ----------------------
;
; PCU specifies the controller and PID for which to define a custom unit
; Caption is the caption displayed on screen during BB logging (8 characters maximum).
; Prec is the number of decimal places to display
; Units is the display units name.
; Op is the operator, one of:
; * = multiply
; / = divide
; i = invert_then_multiply
; The metric value of the PID is multiplied, divided or inverted then multiplied by Factor.
; Offset is then added.
;
; __________________________________________________ _______________________
*PCU
;
; PID Caption Prec Units Op Factor Offset
; ------------ -------- ----- ------- --- ------------- -------------
PCM,ECT, Coolant, 0, °F, *, 1.8, 32.0
PCM,MAP, Manifold, 1, psi, /, 6.894757,
PCM,VSS, Speed, 0, mph, /, 1.609344,
PCM,SPARKADV, Spark
PCM,EQIVRATIO, AFR, 3, AFR, i, 14.63,
PCM,IAT, Intake, 0, °F, *, 1.8, 32.0
PCM,MAF, AirFlow, 1, lb/m, /, 7.559873,
PCM,TP, Throttle
PCM,KR, Knock
-, T1, T1, 1, °F, *, 1.8, 32.0
-, T2, T2, 1, °F, *, 1.8, 32.0

Kevin Doe
March 28th, 2008, 12:48 AM
The linking occurs in sae_generic.txt if I recall correctly. However Paul does not recommend editing that file. What you say seems right, I don't see them in the conversion. Here is hte excerpt from sae_generic.txt which contains the conversions. Not sure where you would put this if you don't edit sae_generic.txt.


# ================================================== ============================
# Conversion of BBL PID names back to V7Parameter names
# ---------------------------------------------------------

*BBLV7

#BBL Name V7 name
#------------- ----------------
; SAE paramaters
WO2AS11 WO2S11_B
WO2AS12 WO2S12_B
WO2AS13 WO2S13_B
WO2AS14 WO2S14_B
WO2AS21 WO2S21_B
WO2AS22 WO2S22_B
WO2AS23 WO2S23_B
WO2AS24 WO2S24_B

; GM Enhanced parameters
ESTDIAG STATE14
ETCTAC1 STATE15
ETCTAC2 STATE16
ETST ETCS
MAF_GM MAF
MAPS MAP
ACHPRS ACP
GENFDC ALT-F
TP_A TP
FRPS FPS
BBVPS BBS
DESTQ DESTRQ
EOP EOPS
EGRCMD EGRCOM
TRACTRQ ACTTRQ
TTQRET SEMRET
BARO_B BARO
EOLIFE EOL
RUNTIME RUN_TIME
MAFSD DYNAIR_LS2
EGRCLOSE EGRPINTLE
IDLERPM IDLRPM
STFTAVG1 SHRTFTAVG1
LTFTAVG1 LONGFTAVG1
STFTAVG2 SHRTFTAVG2
MFFAIL1 MFFAIL
MFPASS1 MFPASS
LTFTAVG2 LONGFTAVG2
FTV FTP
CASE CASEERR
CURRCYL CKREFCYL
FANDC FANPWMDC
GENLDC GENL_DC
IGN1CC IGNCOIL1
IGN2CC IGNCOIL2
IGN3CC IGNCOIL3
IGN4CC IGNCOIL4
IGN5CC IGNCOIL5
IGN6CC IGNCOIL6
IGN7CC IGNCOIL7
IGN8CC IGNCOIL8
INJ1CC INJECTOR1
INJ2CC INJECTOR2
INJ3CC INJECTOR3
INJ4CC INJECTOR4
INJ5CC INJECTOR5
INJ6CC INJECTOR6
INJ7CC INJECTOR7
INJ8CC INJECTOR8
O2H11DC O2HTRDCB1S1
O2H21DC O2HTRDCB2S1
VSFPDC FPVSPDDC
EOT EOILTS
FANSPD_DES FANSPD_ACT
TSTATE33 TSTATE02
TSTATE34 TSTATE03
TSTATE35 TSTATE04
TSTATE36 TSTATE05
TSTATE37 TSTATE06
TSTATE39 TSTATE07
TSTATE40 TSTATE08
TSTATE41 TSTATE09
TSTATE42 TSTATE10
TSTATE45 TSTATE12
TSTATE03 TSTATE13
TSTATE04 TSTATE14
TSTATE05 TSTATE15
TSTATE06 TSTATE16
TSTATE07 TSTATE17
TSTATE16 TSTATE18

Kevin Doe
March 28th, 2008, 12:57 AM
Just for shits and giggles, I added this line to the end of the list

DYNCYLAIR_M DYNCLYAIR_DMA

It did not work. Or at least did not seem to work.

Blacky
March 30th, 2008, 12:17 PM
The V7.5.4 software is supposed to automatically convert from *_M to *_DMA when reading BBL files. I will check it again and fix it.

You shouldn't need to add them to that list in sae_generic.txt.

Regards
Paul