Dumb Question ... but

[superls1]

I have seen many comments on removing "empty" cells. Where/how do you do this, and is it version dependent?

I have established filters, but I don't see cell count as a possible selection.

Thanks.

[Blacky]

Use the V7.2.3 pre-release version, available at the bottom of this page:
http://www.efilive.com/downloads/downloads_7.html

Right click on a map and select "Properties"
Select the [Empty] tab page.
Configure cell count - all cells with a count less than the specified value will be hidden - if cell hiding is on.

Once configured, you can turn "hide empty cells" on/off using the "Hide cells with low cell counts" toolbar icon (or the Ctrl+Alt+H hotkey).

Regards
Paul

[SSpdDmon]

Use the V7.2.3 pre-release version, available at the bottom of this page:
http://www.efilive.com/downloads/downloads_7.html

Right click on a map and select "Properties"
Select the [Empty] tab page.
Configure cell count - all cells with a count less than the specified value will be hidden - if cell hiding is on.

Once configured, you can turn "hide empty cells" on/off using the "Hide cells with low cell counts" toolbar icon (or the Ctrl+Alt+H hotkey).

Regards
Paul

Just out of curiosity, when will this version be officially released instead of "pre-released?" Are there still bugs you're working on?

[Blacky]

7.2.3 has been updated with almost 100 enhancements and bug fixes since it was posted on the web site. So, yes you could say there were still bugs that we were working on. 99% of the "bugs" were introduced with the new features that were added since pre-release 002 was released.

The final (and public) pre-release should be available for download in the next week or two.
If all goes to plan, that version will become the stable 7.3 release which will be cut onto the EFILive CD for distribution.

Regards
Paul

[SSpdDmon]

7.2.3 has been updated with almost 100 enhancements and bug fixes since it was posted on the web site. So, yes you could say there were still bugs that we were working on. 99% of the "bugs" were introduced with the new features that were added since pre-release 002 was released.

The final (and public) pre-release should be available for download in the next week or two.
If all goes to plan, that version will become the stable 7.3 release which will be cut onto the EFILive CD for distribution.

Regards
Paul

Cool. Thanks for the update! :~)

[BowlingSS]

Use the V7.2.3 pre-release version, available at the bottom of this page:
http://www.efilive.com/downloads/downloads_7.html

Right click on a map and select "Properties"
Select the [Empty] tab page.
Configure cell count - all cells with a count less than the specified value will be hidden - if cell hiding is on.

Once configured, you can turn "hide empty cells" on/off using the "Hide cells with low cell counts" toolbar icon (or the Ctrl+Alt+H hotkey).

Regards
Paul

The 002 pre-release still has a problem with the hide cells. At least the 002 release I downloaded a few weeks ago has the problem.

Bill