F302 Green Top Injector Specs

[white01ss]

I've been meaning to post this information up here for a while. I was messing with the B3701 table from stock and noticed a big improvement in drivability. I wanted to know what the real specs are on these injectors so I called Ford and they came through big time. Here's the info...

Ford SVO Green Top 42 lb Fuel Injectors
Ford Part # M-9593-F302
Bosch Part # XL3V-A9A and 280150558

All from Ford Tech Support (800) FORD788, 1-800-367-3788

Q: What fuel pressure are the injectors rated at?
42 lb @ 39.15 psi

Q: What is the Injector Pulse Width Voltage Adjustment?

They called this "Injector Offset"

V - ms
6 - 4.986 ms
8 - 2.098
10 - 1.321
11 - 1.095
12 - .919
13 - .786
14 - .670
15 - .575

Q: What is the Minimum Pulse Width for the new injector? Stock LS1 is 1.27 ms.
1.13 ms

Happy tuning!
Dan

[hquick]

Are these the same as the Bosch greentop 0 280 150 558 injectors?

Thanks

[white01ss]

Are these the same as the Bosch greentop 0 280 150 558 injectors?

Thanks

Yes, my injectors have this printed on them: 280150558. Updated post.

[hquick]

Thanks heaps.

Howard

[Chalky]

Great info. Nice to know! I just ordered some blue top 36# injectors. Guess I need to call Ford as well.

[Chuck L.]

Great info. Nice to know! I just ordered some blue top 36# injectors. Guess I need to call Ford as well.
I have some new, 36# blutops, and an ASNU bench.
I could flow them at 39 and 43.5#, and see what I get.
NE interest?

[Chalky]

I have some new, 36# blutops, and an ASNU bench.
I could flow them at 39 and 43.5#, and see what I get.
NE interest?


Thanks. Would be great to know.

[hquick]

Yes...that would be interesting to know Chuck.

[Dirk Diggler]

Wow thanks for the info I hope this doenst push my tune to far outta wack when i flash the new values in

[redhardsupra]

I have some new, 36# blutops, and an ASNU bench.
I could flow them at 39 and 43.5#, and see what I get.
NE interest?

flow them, post it, and i will send you a fruit basket ;)

you sure that the blue fords are 36? i thought they're 39

[Tordne]

Don't suppose you've got the info for the 30's?

[redhardsupra]

dont worry, i've already sent him on the search and rescue mission for ford datasheets

[hquick]

I'm goin in...."A'll be baque"...Lol!

[mkehler]

My ecu (megasquirt extra 2.1.0) has a setting for 'injector pwm period' - This sets the speed at which the injector signal is turned on and off during PWM . Default setting in Megasquirt is 66usec. This setting was not configurable in previous version of Megasquirt (ms1)

Any information out there on whether this setting is suitable for these injectors? I see a lot of users configuring with 50usec but I'm not sure why.

thanks!
Matt