PDA

View Full Version : 06+ Allison DVT



Cougar281
April 14th, 2008, 01:35 AM
Any ideas when we're going to get DVT for the 06+ Allison?

GMPX
April 14th, 2008, 10:52 AM
It is in the latest BBL beta version.
Check you have the file - allb.dvt in the folder -
\Program Files\EFILive\V7.5\Configuration

Cheers,
Ross

Cougar281
April 14th, 2008, 12:25 PM
It is in the latest BBL beta version.
Check you have the file - allb.dvt in the folder -
\Program Files\EFILive\V7.5\Configuration

Cheers,
Ross

maybe I'm dumb, but I've only got an alla.dvt there. Looked in the last few beta zips and I didn't see one there either :nixweiss:

GMPX
April 17th, 2008, 10:46 AM
I've attached it here.
Keep in mind, they are still in beta, so feedback would be appreciated.

Cheers,
Ross

tinman22
April 17th, 2008, 11:42 AM
do I need the march 20th update to see these things?I dont see any DVT files in there at all. I believe the last update I did was the 7.5.3 before the march 20 beta release.

Cougar281
April 17th, 2008, 12:36 PM
I've attached it here.
Keep in mind, they are still in beta, so feedback would be appreciated.

Cheers,
Ross

Thanks Ross... It was actually in the latest V2 BBL Beta package.

GMPX
April 18th, 2008, 10:30 AM
So is it all good now?

Cougar281
May 2nd, 2008, 07:40 AM
So is it all good now?
Check out the feedback from myself and others here (http://forum.efilive.com/showthread.php?t=7876). Lots of "Shift Range Inhibited" and no-go issues it seems...

GMPX
May 4th, 2008, 10:22 AM
Thanks, a few more grey hairs for me then :bawl:

Cougar281
June 11th, 2008, 12:52 PM
Thanks, a few more grey hairs for me then :bawl:

Any new updates Ross? If I connect to the TCM with DVT, it'll randomly drop to neutral with a "Range Inhibited" message. The only thing I've tried to use in the DVT controls is TCC Lock.

Cougar281
July 6th, 2008, 02:38 PM
Anything new? Still having "Shift Range Inhibited" when trying to to anything other than TAPs clearing (Specificly lock TCC). Has anyone else tried to use any of the other DVT controls?

GMPX
July 7th, 2008, 10:29 AM
No changes have been made and I've not heard much back from support of people having the same issues. This means either nobody is using them or your issue is unique.
A few more people testing what you are trying to do would be helpful.

Cheers,
Ross

markap81
July 7th, 2008, 03:55 PM
Ross,
My truck is a 2006 LBZ with a suncoast stage 5 transmission, and a ATS Co-Pilot. It made 513hp 902 lb/ft. I made 6 runs on a dynojet 224xlc. Using the bi-directional command to lock fourth, it will lock in fine and I can drop my rpms down to 1200. While i'm making my run when I hit approx 3000 rpm the transmission seems to drop out of gear. And I get the shift range inhibited message. I haven't tried this on the street at all but i'm guessing the same thing will happen. I think this is related to Cougar281's problem. Any ideas?

Mark

Edit:

I guess other people are having my same issue. http://forum.efilive.com/showthread.php?t=7967&page=2
Also, i was using the June 22 release of efi live.

GMPX
July 7th, 2008, 11:47 PM
Thanks markap81 for confirming similar issues.

Cheers,
Ross

Cougar281
July 8th, 2008, 05:44 AM
Ross, let me know if there's anything I can do to help figure out what's going on... You happen to know of any software that would work with one of the Elm327 devices to allow CAN/GMLAN bus snooping and logging?

GMPX
July 9th, 2008, 10:28 AM
You happen to know of any software that would work with one of the Elm327 devices to allow CAN/GMLAN bus snooping and logging?

No, we don't use hobby equipment :hihi:

Cougar281
July 9th, 2008, 11:20 AM
No, we don't use hobby equipment :hihi:

Now Now.... :)

GMPX
July 9th, 2008, 04:53 PM
Was just a joke :sly:

Cougar281
July 10th, 2008, 04:18 AM
Was just a joke :sly:

I know, hence the smiley :)

That's the problem with posts like this... you can't always tell how something's meant to be taken like you could with Face to face or verbal conversation.

Cougar281
July 12th, 2008, 06:47 AM
Ross, After this mornings update, the 06 Alli DVT is better, but still not perfect. With the last update, I couldn't get out of my driveway without a "Range Shift Inhibited", and it would pop up randomly while driving with DVT only connedted to the TCM. Now, with this update, I was able to drive about two 7 mile trips with the TCC locked. I got one SRI leaving a parking spot on my way home, but other than that on time, it seemed to only come up a few seconds after unlocking the TCC.

Edit: it seems my not getting a RSI on frist moving the firdt time may have been a fluke... with the exception of the very first time I started with DVT enabled, I've gotten a RSI shortly after enabling DVT, then after that, only when a command is disabled (Unlock the converter or uncheck "Hold X gear"). Having said that, it's still improved over the last release.

Cougar281
August 10th, 2008, 08:09 AM
Any new updates on DVT?