PDA

View Full Version : Wiring for Active Fuel Management



4wheelin
April 16th, 2008, 10:25 PM
Does anyone have the pin outs for the E38 L76 Active fuel management? I've got the plug and wires and want to hook it up.

Cheers

ScarabEpic22
April 17th, 2008, 11:10 AM
Does your block support it? Its not just wiring it up, there are hard parts that have to be swapped as well. You probably know this, Im just reminding ya.

And sorry I dont have your wiring diags :(

4wheelin
April 17th, 2008, 10:46 PM
I haven't had this particular engine apart but it has the connector at the rear and I have seen in another I did cam swap in that 8 lifters are different and that there are large solenoids under the valley, visible with the cam cover off. I was under the impression that to be an L76 it had to have the gear else it would be a L98??

Here's hoping.

4wheelin
May 5th, 2008, 09:28 PM
Got it for anyone interested

AFM connector position A goes to E38 C2-11

AFM position B goes to E38 C2-9

AFM position C goes to E38 C2-10

AFM position D goes to E38 C2-14

AFM position E goes to 12 volt ignition

I'll be trying in 2 weeks when the vehicle is re-booked.

Joel