PDA

View Full Version : Need help with PID validation



Rontune
April 30th, 2008, 01:00 PM
I am trying to do some idle RAFIG/RAFPN tuning using the associated following PIDs:
IAC_LTD_DMA
IAC_LTPN_DMA
IAC_STD_DMA
IAC_STPN_DMA
None of these PIDs will validate. They are there, just won’t validate. Have repeatedly tried to validate. All PIDs are in metric units. The car/computer is 99 Vette A4. The EFILive is version V7.3.2 (Build 416). Has anyone else had this problem…and fixed it? Would really appreciate some help with this. Thanks

bink
May 1st, 2008, 05:55 AM
Bump^^^^.
Any ideas???

Cheers,
joel

Blacky
May 1st, 2008, 07:32 AM
The first thing you should do is to update to the latest version.
Each new version adds more supported features for more supported operating systems. Chances are those PIDs were not defined for your vehicle in that version of EFILive.

Download V7.5.3 here:
http://www.efilive.com/download.aspx

Regards
Paul

Rontune
May 1st, 2008, 12:43 PM
Thanks for the reply Paul/Blacky. Will download/update tonight and try again in the morning. Thanks again.

Ron

Rontune
May 2nd, 2008, 03:17 AM
Paul/Blacky. Well, you were correct. Updated and ran a scan this morning - all PIDs validated. Thanks again for your attention and assistance.

bink
May 3rd, 2008, 02:29 PM
EFILive - best customer service on the planet. :D