PDA

View Full Version : WB 02 Location



Kurtomac
May 12th, 2008, 01:37 AM
Ok 2002 Z06...have LG pros...offroad x pipe with plugs in the rear 02 bungs...would there be a problem with installing my LC1 wideband in one of those plugged bungs....had this for a while been lazy and hadnt got around to installing yet

SSpdDmon
May 12th, 2008, 01:45 AM
I don't see why not. I'd suggest using the driver's side bung as that side typically tends to run slightly leaner than the passenger side. At least, that's what I've noticed on most LSx engines. The fuel trims will tell you which side of your motor is a little leaner (which ever one is greater).

Kurtomac
May 12th, 2008, 01:54 AM
hadnt been under my car in a while but the 02 bungs might be after the X

SSpdDmon
May 12th, 2008, 03:15 AM
hadnt been under my car in a while but the 02 bungs might be after the X
They should be before it. Wouldn't make sense if you were running cats to put the bungs behind the x. How would you know which cat to replace for an inefficiency code. ;)

Kurtomac
May 12th, 2008, 03:50 AM
makes since....like i said...hadnt been under there in a while