View Full Version : problem with the speedometer
odd boy
May 18th, 2008, 05:02 AM
guys,
who knows how to solve the following issue: whenever I change the diff ratio, the shift point correction won't show any table to adjust!!!
Please look at the attachments
3307
Blacky
May 18th, 2008, 11:37 PM
The list of shift tables to update is stored in the file:
\Program Files\EFILive\V7.5\cal_adjust.txt
You can add a section that matches the controller you are working on:
[LS1A] = 97/98 LS1
[LS1B] = 99+ LS1
[T42] = T42
[T43] = T43
[ALLA] = 5 speed Allison
[ALLB] = 6 speed Allison
Then put a list of all the tables that you want updated by the shift point adjustment into that section. Then save the file and restart EFILive.
The "=Yes" or "=No" setting signifies whether the table's check box is checked or not in the list.
Regards
Paul
ScarabEpic22
May 19th, 2008, 08:53 AM
Paul, I just checked in my V7.5 folder and that file is under \Program Files\EFILive\V7.5\Configurationcal_adjust.txt, might be something to do with the new V8 beta stuff?
Very cool to know about this file, definitely going to be using this feature now!
Blacky
May 19th, 2008, 09:05 AM
You're right, my mistake.
It is in \Program Files\EFILive\V7.5\Configuration\cal_adjust.txt
Regads
Paul
Blacky
May 19th, 2008, 09:06 AM
Very cool to know about this file, definitely going to be using this feature now!
Hint: The section names you must use for various controllers, are the same names as the folder names in the Calibrations folder.
Regards
Paul
odd boy
May 19th, 2008, 05:36 PM
thanks to you all
ScarabEpic22
May 20th, 2008, 10:44 AM
Hint: The section names you must use for various controllers, are the same names as the folder names in the Calibrations folder.
Regards
Paul
Good to know, thanks!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.