Gelf VXR
May 18th, 2008, 04:05 PM
Interesting article regarding the LS2, 472BHP with race headers on an engine dyno. Only 400BHP in the vechicle, I suspect the air intake to be big factor in the difference, in my logs i'm seeing 92-93kPa @ 6400rpm at WOT when BARO = 102kPa.
I note from the article 29 degrees of advance dialed in with ported heads and fast intake.
http://www.popularhotrodding.com/tech/0611phr_ls2_modification/index.html
"As you can see, the AFR heads and FAST intake really helped the LS2 inhale. With a gain of 41 hp and an increase in torque of 39 lb-ft, only the limitations of the stock cam were holding back the engine. Still, for such a mild cam, 503 hp and 489 lb-ft of torque isn't too shabby. Timing was set at 29 degrees"
I note from the article 29 degrees of advance dialed in with ported heads and fast intake.
http://www.popularhotrodding.com/tech/0611phr_ls2_modification/index.html
"As you can see, the AFR heads and FAST intake really helped the LS2 inhale. With a gain of 41 hp and an increase in torque of 39 lb-ft, only the limitations of the stock cam were holding back the engine. Still, for such a mild cam, 503 hp and 489 lb-ft of torque isn't too shabby. Timing was set at 29 degrees"