PDA

View Full Version : Error on LMM



jpgmtech
May 20th, 2008, 05:00 AM
Getting an error trying to read an LMM:

Cannot merge calibrations with operating system file:
C:\Program Files\EFILive\V7.5\Configuration\M97.bin

I just installed EFILive on a new laptop, and now I have a paying customer standing here waiting for his DPF removal program... of course this has to happen now.

I searched my hard drive, and I cannot find any files by the name of M97.bin

Thanks,
BTW using version 7.5.3 full install.

duramaximizer
May 20th, 2008, 02:46 PM
Incase you didn't get the message, he has the newest operating system, which sucks for both of you......... because if you do the DPF delete, he will have to ride around with your V2 in his pocket to clear the codes.

Don't ask me how I know. Shnizzle

jpgmtech
May 21st, 2008, 12:27 AM
Unfortunately, I didn't get the memo...:wallbash:

Used a work-around for this as he travelled 6 hours to get to the shop! I pulled an ECM from another used 2007 truck that we had on the lot that had not been updated, and set that up in his truck. Works great for him.

Normally the program says "calibration not supported" when this occurs, not "missing file" or "range error" or something like that.

At any rate, I will be quizing customers on this before I set up an appointment until support is released...:help2:

duramaximizer
May 21st, 2008, 08:19 AM
I am in the same boat. :doh2:

Running925
July 7th, 2008, 01:02 PM
hey guys, i've just run accross this same error in an 2007.5 LMM with the latest programming as of 7/7/08.

I'm needing to know how to resolve this issue. I'm getting the exact same error message, as shown in the screen shot below.

http://i35.photobucket.com/albums/d174/Running925/Anthonys_Truck/error_message.jpg

Any information would be appreciated.

Thanks in advance.

GMPX
July 7th, 2008, 03:08 PM
Easiest fix is to download the latest software from here -
http://www.efilive.com/download.aspx
EFILive V7.5.4 Release

Cheers,
Ross

Running925
July 7th, 2008, 03:20 PM
Easiest fix is to download the latest software from here -
http://www.efilive.com/download.aspx
EFILive V7.5.4 Release

Cheers,
Ross

downloading now, will install and re-test tomarrow evening.

Thank you for the quick responce and i'll update with my progress.

Tony