Code P0343. Newly installed LS3 416 in 02 Z06. WTF

[PRAY]

P0343 is Cam Position Sensor Circut High Bank 1 Sensor A. I just installed my LS3 416 in my 02 Z06. I used the SDPC supplied sensor extension for the knock sensors and CPS. The car stated and ran pretty well for the first break in period. I noticed the code on the second break in period and I can't get it to go away. This morning it didn't want to start but finally did. It drove okay but at idle it is very choppy. I checked the connections and they are fine. Did I miss any thing in the tune that I was supposed to put some new data in for the relocated CPS? Any help would be great. Thanks.

[Bruce Melton]

Not really uncommon. the A and C terminals are likely reversed in the ext harness. Try reversing the the plug at the firewall, if you can reach it.
Betcha it pops and snorts during startup?

[PRAY]

You sir have won the prize. I swapped the A and C terminal at the timing cover and all is well. Thanks for the response.