PDA

View Full Version : 2008 LMM Operating System - 12628594



GMPX
May 25th, 2008, 11:53 AM
Hi All,

This is a reposted thread about the new LMM ECM Operating System GM released in the last couple of weeks. I stupidly deleted the original thread whilst editing my post :doh2:

There is three files listed below as attachments.

1 - M97.zip
2 - E35_Calz.zip
3 - E35_Cal.zip

The file 'M97.zip' needs to be extracted to -
\Program Files\EFILive\V7.5\Configuration

If you are using EFILive V7.5.4 or later then download and unzip the file 'E35_Calz.zip' to -
\Program Files\EFILive\V7.5\Calibrations\E35

For earlier EFILive version download and unzip the file 'E35_Cal.zip' to the same directory -
\Program Files\EFILive\V7.5\Calibrations\E35

Then reread your truck and all should be right to tune.

Cheers,
Ross

comet07
June 1st, 2008, 02:48 PM
I got my recall letter in the mail. This new operating system is being installed by GM under the premise of a theft deterrent problem. Not trying to be paranoid but my truck has 40,000 perfect miles- 33,000 of them DPF free and tuned. Has anyone seen where GM's problem was? Should I leave well enough alone?

joecar
June 2nd, 2008, 01:41 AM
My $0.02: if it's running perfect, then leave well enough alone.

ChipsByAl
June 2nd, 2008, 04:26 AM
I had one today that was a no start with a theft concern. The update fixed the problem with no parts.

metalhead
June 2nd, 2008, 05:34 PM
Excellent. I have an appointment in like three hours for the new reflash from gm.

GMPX
June 4th, 2008, 03:56 PM
Feel free to do the update, we support the new ECM operating system.

Cheers,
Ross

J.A.T.
June 11th, 2008, 09:02 AM
I did my recall, and I can not get it to work is there anything I may be missing. I have tried the down loads you have posted and still getting the 97 bin unable to read or something like that.

GMPX
June 16th, 2008, 09:29 AM
Sorry J.A.T I missed your question, the only reason it would still say that is if the files have not been put in to the correct directories. Please recheck against the first post.

Cheers,
Ross

J.A.T.
June 18th, 2008, 01:30 AM
no problem it. you are wright it was my fault. thanks it is working now

killerbee
June 23rd, 2008, 02:43 PM
I just did the step 1 and 2 updates above to a fresh download of 7.5. No luck opening a customers new LMM flash (he emailed me the tune). "unrecognized PCM" msg.

What could I be doing wrong?

GMPX
June 23rd, 2008, 02:47 PM
Same reason I gave J.A.T

Racehemi
June 24th, 2008, 12:14 AM
I just did the step 1 and 2 updates above to a fresh download of 7.5. No luck opening a customers new LMM flash (he emailed me the tune). "unrecognized PCM" msg.

What could I be doing wrong?

Open the tune, locate the Calibration Definition File (*.cal), search your pc for that particular .cal, you will most likely find it in the wrong directory.