PDA

View Full Version : LS1 PCMs



Harrismarine
June 10th, 2008, 05:14 PM
Can someone tell me what the difference is between the PCM with the blue and red pcm connecter and the one with the blue/green connectors. Will the One with Blue/ Green connector still work OK??

Mike

Delco
June 10th, 2008, 07:51 PM
One is a 512k pcm as used on the cable thottle motors here in Aus , the other is the 1024k PCM used with the drive by wire setup , not interchangable

Harrismarine
June 11th, 2008, 06:54 AM
Thanks, so the 512pcm will not do drive by wire? (we use all cable). Do they use the same cam and crank signal?

Mike

Delco
June 11th, 2008, 11:07 AM
Yes same crank and cam signals , the 512k pcm was able to run FBW but it is different to how it was done here in AUS on the 1024k pcm