PDA

View Full Version : V7.5.4 (62) Dash Problem - Help



JR-CRUZN-C5
June 13th, 2008, 12:56 PM
Ok maybe I'm nuts but here goes. I upgraded everything and set out to set up a new Dashboard as I'm getting my car back next week!

The Sparkadv., Longft1, and the Longft2 gauge backgrounds come up "green" no matter what or how I set them up. If I change them, save them then exit when I go back in they are green!!! If I delete them and re-install them with the default grey background they come back green after exiting. All the other gauges/pids work properly but those three.

JR

Ninety8C5
June 13th, 2008, 01:13 PM
Open 'Gauge Properties' for each gauge and then go to the 'Alarms' tab. Set the 'Alarms Low' to -101.0.

The green gauges happen because the gauge is exceeding the low alarm when the Scan Tool opens.

JR-CRUZN-C5
June 13th, 2008, 02:13 PM
Thanks - I changed them and they all worked perfectly!!!

JR