PDA

View Full Version : Help Please!



Nasty Girl
June 16th, 2008, 02:55 AM
My laptop crashed and I tried downloading the software but when I connect to the truck it gives me an error code saying no interface cable found. I am assuming I need to download a driver for this as well? If so where can I find the software for this and how do I install correctly?

Dale
June 16th, 2008, 03:58 AM
here are downloadable drives from efilive

http://www.efilive.com/download.aspx


No also, Ive had this problem a few times.

1. I didnt connect all the cables in propper order
2. Another is, if I have the laptop power plugged into the car to charge the battery, it wont connect. It has to be on battery mode to connect, then I can plug in to charge. *shrugs*

Nasty Girl
June 16th, 2008, 07:07 AM
Still no worky.:confused: I bought mine about 2 1/2 years ago................any bearing on my problem?

joecar
June 16th, 2008, 07:18 AM
I pm'd Tech Support.

NG, do you have FlashScan V1 (small rectangular) or V2 (curvey sides with blue LCD)...?

Blacky
June 16th, 2008, 12:31 PM
If you download the latest V7.5.4 software from here:
http://forum.efilive.com/showthread.php?t=8289 (It's about 60Mb so it could take a while)
Once that software is installed there will be a program called usbview in the folder \Program Files\EFILive\Drivers\Utilities.
Or you can download just the usbview program here: http://www.ftdichip.com/Resources/Utilities/usbview.zip

However, if you are using Win2K, WinXP or Vista, that V7.5.4 installation will install the USB drivers correctly during the installation process. So I highly recommend installing it.

Anyway, please connect your FlashScan and run that program, you should see EFILive FlashScan show up somewhere in the displayed devices.
If you don't then the drivers are probably not installed correctly.

Regards
Paul

mr.prick
June 16th, 2008, 12:52 PM
is this a new laptop you are installing on?
did you re-enter your license key?

Nasty Girl
June 16th, 2008, 02:48 PM
Thanks for your help guys! I got ahold of Guy Tripp today and he ran me through the driver install.......Thanks again Guy! I will be hittin the dyno tomorrow with the new build and will hopefully raising the fuel only bar I set last year. Thanks again Tony (Ridge Runner Diesel) for all your help as well! :cheers:

horsehaulin
June 17th, 2008, 03:12 AM
Glad you got it working!

Tony