PDA

View Full Version : Is there a supported vehicle list for V6?


N0DIH
June 20th, 2008, 01:29 AM
Does anyone have a supported vehicle list for EFILive V6?
joecar
June 20th, 2008, 02:06 AM
If it is OBD-II with VPW protocol (i.e. 1997-2007 GM), then there's a good chance you can log from it.
N0DIH
June 22nd, 2008, 12:02 PM
Is V6 scan only or is it flash and scan?

I got the impression it would flash too, that is what it was originally bought for.
joecar
June 23rd, 2008, 02:44 AM
Tom,

V6 flashes also.

You can upgrade to V7 software (you will need to get a new cable registration license).

All the software is free.

You have FlashScan V1 that you run V6 on, right...?
N0DIH
June 23rd, 2008, 03:04 AM
Got it working with V7.5, so far at least, it does support the AT1 RS232 interface.
Now to see what I can do with it....

But on the V6 question, it flashes, but what vehicles? I can't find a list anywhere. I have the v7 scan license.
joecar
June 23rd, 2008, 05:20 AM
Got it working with V7.5, so far at least, it does support the AT1 RS232 interface.
Now to see what I can do with it....

But on the V6 question, it flashes, but what vehicles? I can't find a list anywhere. I have the v7 scan license.You won't be able to flash using the AT1 interface.

To flash, you need a flash+scan license, and an unused PCM license.

Flashable Vehicles: http://www.efilive.com/supvehicle.aspx
N0DIH
June 23rd, 2008, 05:24 AM
Mine is a AT1 V2, which means it will flash. Not to be confused with EFLive V2. It is the 2 way version..... I guess I will have to try!
joecar
June 23rd, 2008, 05:47 AM
Oh, I see.

EDIT: it won't work.
Blacky
June 25th, 2008, 02:54 PM
Mine is a AT1 V2, which means it will flash. Not to be confused with EFLive V2. It is the 2 way version..... I guess I will have to try!

EFILive does not support reading or flashing any controllers through the AutoTap interface. You must use a FlashScan interface for flashing.

Regards
Paul
N0DIH
June 27th, 2008, 04:39 AM
So, what you are saying, is the V7.x version of EFILive is the FIRST version to ever FLASH a PCM?

I was under the impression V5 and up could flash with the EFILive V1 or V2, or the AutoTap AT1/AT123, V2 and later or ATU.



EFILive does not support reading or flashing any controllers through the AutoTap interface. You must use a FlashScan interface for flashing.

Regards
Paul
Blacky
June 27th, 2008, 08:24 AM
So, what you are saying, is the V7.x version of EFILive is the FIRST version to ever FLASH a PCM?
Correct.

Regards
Paul