PDA

View Full Version : Upto date Cal_link file



hquick
June 22nd, 2008, 10:15 AM
Anyone have an upto date Cal_link file they're willing to share?
Something with the RTACS settings for most/all possible parameters?
If I get a chance I'll go through and try to set one up...unless someone already has one.
Since the latest update I had lost my BoostVE rtacs settings so had to re-read on how to set it up again.:doh2:

hquick
June 23rd, 2008, 10:26 AM
Here's mine at present....

mr.prick
June 23rd, 2008, 10:36 AM
here`s mine
3530
516k 99+ ls1

hquick
June 23rd, 2008, 11:02 AM
Just updated mine...now yours and mine together.
I'll keep the attached cal_link file in the first post updated with changes.

405HP_Z06
June 23rd, 2008, 01:07 PM
Thanks fella's!

hquick
June 23rd, 2008, 01:30 PM
Anything to help out...Aaron.
You've done plenty to help.
I just updated it again as I noticed Mr.P had set the RRR's up to suit just the LC_11 WBO2 so I just included all of the extra WBO2's.
Mr.P....will that B4307 do RAFPN as well as RAFIG? If not....how do we change it to do both?
Also...anyone know how to setup for the A0014 and A0008 tables?

mr.prick
June 24th, 2008, 12:01 PM
Anything to help out...Aaron.
You've done plenty to help.
I just updated it again as I noticed Mr.P had set the RRR's up to suit just the LC_11 WBO2 so I just included all of the extra WBO2's.
Mr.P....will that B4307 do RAFPN as well as RAFIG? If not....how do we change it to do both?
Also...anyone know how to setup for the A0014 and A0008 tables?

i would imagine it would,
LOL set you update frequency on the high side and/or lower
the coarse/fine control and/or add a filter.
or else you may end up having to restart your car.:hihi:
i found RAFIG to be a little tricky with RTACS,
the RAFIG numerator seems to swing up and down for me.

mr.prick
June 24th, 2008, 04:04 PM
Anything to help out...Aaron.
You've done plenty to help.
I just updated it again as I noticed Mr.P had set the RRR's up to suit just the LC_11 WBO2 so I just included all of the extra WBO2's.
Mr.P....will that B4307 do RAFPN as well as RAFIG? If not....how do we change it to do both?
Also...anyone know how to setup for the A0014 and A0008 tables?

i simplified mine for the WBO2 i am using.
yours is a more user friendly version for most people.:grin:
since EFILive beta V7.5.4 (Build 44) this is now available. :unwrap:
RTACS now supports Addition, subtraction, multiplication and division as well as the
current BEN factor percentage adjustment. Just add the operator (+, -, * or /) you wish
to use followed by a comma before the first PID name in the *.RRR key like this:
Bxxxx.RRR=+,<pidname> Leave it blank to use the standard BEN factor %.

hquick
June 24th, 2008, 04:33 PM
Thanks for the info.
I did see in yours where you had inserted the '-' in order to RTACS knock.
I'm not too sure yet what can be RTACS'd and what can't. Hopefully if the above cal_link file ends up being complete Ross can add it to the program as a permanent fixture so as people don't have to go through this in the future.