PDA

View Full Version : Could someone please explain B6615-20


BlackGMC
June 22nd, 2008, 04:03 PM
I have been doing a little research into the bog I have off the line and I ran across a couple of threads about these tables, but I would really like someone to explain them a little better..

Thanks

Corey
charcold-bowtie
June 23rd, 2008, 12:18 AM
hey cory. I think they are all 4WD related?? Look at this attched tune. its a 4wd and this is a stock tune and it is enabled.
BlackGMC
June 23rd, 2008, 12:59 AM
Hmmm, I looked at some of the tunes on holden and alot of them have those values maxed out, and they were not just 4wd, some were camaros, trucks, corvettes, etc...
charcold-bowtie
June 23rd, 2008, 03:13 AM
but were they set to Enabled? I duno perhaps someone else will chime in in sometime.
BlackGMC
June 23rd, 2008, 05:03 AM
but were they set to Enabled? I duno perhaps someone else will chime in in sometime.


Some were and some were not, it was kinda a crap shoot... Some all were set to ~41million, some on a couple were set to ~41million, some were slightly higher than stock, etc, and some were untouched....
BlackGMC
June 23rd, 2008, 10:18 AM
Ttt...
BlackGMC
June 25th, 2008, 01:55 AM
http://smiliesftw.com/x/tumbleweed.gif

Anybody?
ScarabEpic22
June 25th, 2008, 09:42 AM
No idea man, my guess would be for torque limiting in 4WD mode (for the front axles) and to not grenade the rear end. But mine were maxed out on my TrailBlazer so I have no idea what they actually do.
BlackGMC
June 26th, 2008, 11:39 AM
ttt...
BlackGMC
June 27th, 2008, 04:09 AM
ttt...