ViciousKnid
June 30th, 2008, 03:36 AM
I've had my truck tuned pretty damn good before without a wideband by the guy I got EFIL from but reading the tutorial shows setting up a map when you have a wideband.
Here's where I am. I'm just wondering what I should do here since I don't have a wideband just yet.
"4. Press Ctrl+Enter to open the MAP property editor window.
5. Select the [Data] tab page and check the Selected check box.
6. Select "Base Efficiency Numerator n - XXX" from the Parameter drop down list box, where n is the analog connection (1 or 2) and XXX is the wide band controller."
I don't have an option for Base Efficiency as it appears to be Wideband related.
Thanks
Here's where I am. I'm just wondering what I should do here since I don't have a wideband just yet.
"4. Press Ctrl+Enter to open the MAP property editor window.
5. Select the [Data] tab page and check the Selected check box.
6. Select "Base Efficiency Numerator n - XXX" from the Parameter drop down list box, where n is the analog connection (1 or 2) and XXX is the wide band controller."
I don't have an option for Base Efficiency as it appears to be Wideband related.
Thanks