PDA

View Full Version : E38 = Not valid PID's


MN C5
July 6th, 2008, 10:52 AM
My Cylinder air and others don't work. I'm validating while connected to the vehicle.
GMPX
July 6th, 2008, 11:22 AM
Only DMA PID's not validating? If so what OS?

Cheers,
Ross
MN C5
July 6th, 2008, 11:28 AM
Yes, 12622161 os 12614085 cal
GMPX
July 6th, 2008, 11:39 AM
Has it ever worked for you?
I just checked our config file for that OS which will be in the latest release and there is no DMA PID's defined at all for that OS!, which is very odd I must say.

Cheers,
Ross
MN C5
July 6th, 2008, 12:23 PM
Just started using this OS for the new configuration. Swapped the 4L65 for a 6 speed and had to change OS's so I used this one from a truck off the dealer lot.

So yes those PID's worked before, just NOT with this OS...

Thanks

Dennis
MN C5
July 6th, 2008, 12:32 PM
:notacrook::notacrook:I haven't bothered to convert my V2 streams or I'd just flip in another OS:doh2: Just one of those ways to make more work for both of us without even trying.:grin:
MN C5
July 7th, 2008, 02:41 PM
I'm still looking for some help.. Someone throw me a rope...lol
GMPX
July 7th, 2008, 03:19 PM
Well, I don't know what to say but the DMA PID data is gone from our config file, that is why I asked if it ever worked, it may have been removed accidently.
I'll need to define them all again. Gimme a day or two.

Cheers,
Ross
MN C5
July 7th, 2008, 10:34 PM
Thank you very much!....:cucumber: