E40 DMA Not Working

[Forcefedperformance]

We have a 06 GTO E40 With OS #02603159 Calibration # 12603390
And i can not get any of the DMA pids to work ......any one have a clue to as what is going on here ...we was using 7.5.3 and i updated it this morning to 7.5.4 thing that would help but still no luck...Please Help .

[GMPX]

How odd, they have never been defined in the software!, However that is a pretty old OS which is probably why nobody has come across that before. I'll add them in today and send you an updated file.

Cheers,
Ross

[Forcefedperformance]

Thanks Ross ....we got this car on the dyno right now and its like walking around in the dark with out those...btw its a gto with a F1-a Procharger and ETP 245 Heads pushing about 15 PSI so it should make some crazy power!

[Forcefedperformance]

Hey Ross any luck with that File?

[GMPX]

Lucky I had too many coffee's today and I'm still up!
Yes I got it sorted, I'll Email it to the address you registere with.

Cheers,
Ross

[Forcefedperformance]

thanks ross....i will keep checking my email for that file

[Forcefedperformance]

Still Looking for that e-mail, not sure if your still working on it or if it got lost in cyber space

[GMPX]

It must have got lost, I sent it 8hrs ago to -
forcefedperformanc@sbcglobal.net

If that is wrong please let me know, as yet it has not bounced back.

Cheers,
Ross

[Forcefedperformance]

Nope thats the right one...Try sending to littlemiss28@comcast.net
please. I think our email here is a little screwy here some times.


Thanks Bill

[Forcefedperformance]

:help2:

[GMPX]

Resent this morning.
If you don't get it then download the software update shown below -
http://download2.efilive.com/Software/V7.5/EFILiveV7.5.4.65.exe

That has the updated file.

Cheers,
Ross

[Forcefedperformance]

Is this the same one that is on the EFI live Download page?

If So i have all ready done that and its still not working
But i will try that link and get back to you

[GMPX]

The download page was updated only 2hrs ago, so you probably have an earlier version.

Cheers,
Ross

[hrthsv]

I have had to add E 40 grammes per cyclinder to the last 3 version of EFILive starting with V7.53. If you still have a copy of V7.42 you just go through the config files (I think) than get to LS2 High octane spark table and add the E40 DMA to the list the same as V7.42. I down loaded the latest version last week and still had to do this to get grams/cycl to highlight in the timing table from logs

[1SlowHoe]

Would this be why I plugged in the scan tool and it wouldnt read ANYTHING and just seemed to lockup?

Same OS as the original poster on a 2006 GTO E40