PDA

View Full Version : possible problem with software



acrider2
July 21st, 2008, 12:58 PM
I have been trying to tune out the downshifts on tow/haul with no luck. I went and watched a tutorial over at duramaxtuner.com and noticed that on his screen it says pattern B is for tow/haul and on mine it says pattern D is for tow/haul. None of the changes I have made to pattern D seem to do anything so I belive it is pattern B that is for tow/haul. Has anybody else seen this. Maybe Ross will see this and clear it up. Here as a screenshot of my computer. I'm running 7.5.4 (build 65) I have opened a few tunes and they are all the same.

http://img521.imageshack.us/img521/7317/754build65zk0.jpg



Now this is a screen shot I got from the video tutorial from duramaxtuner.com. I'm not sure what version he was running when he put this together.

http://img112.imageshack.us/img112/9770/nickswu9.jpg

If you look at them you will see what I'm talking about with the shift patterns labeled differently.

I also posted this at Diesel Place. http://www.dieselplace.com/forum/showthread.php?t=256188

GMPX
July 22nd, 2008, 11:03 AM
We changed them from what they originally were in March 2008 based on seom feedback we got that they were wrong. Then everyone else complained we messed them up! so on July 11th I set them back to how they used to be.
The current download on the main page has the corrected version.

Cheers,
Ross