LS1 engine on another car

[odd boy]

What steeps need to be done in case a LS1 engine is installed on another car like ford, Nissan? The case I have here is that, a friend has 94 ZX, he put LS1 engine and has removed the un-necessary plugs, but the engine doesn't start, some one said you need to cancel the security of the PCM, then every thing will be okay, can some explain this, please

[5.7ute]

Set G0102 to none. What happens is without the correct signal from the BCM the vehicle will not be able to start.

[johnv]

Even if the VATs is still on , the engine should still fire and run for a few seconds then stop, so maybe he has other wireing or setup issues:doh2:

[hquick]

Even if the VATs is still on , the engine should still fire and run for a few seconds then stop, so maybe he has other wireing or setup issues:doh2:

Correct. We had this issue after the LS1 PCM upgrade. Vats needed to be disabled but the truck still fires...just dies immediately.
Check wiring and codes.

[odd boy]

I will check and get back to u

[odd boy]

Set G0102 to none. What happens is without the correct signal from the BCM the vehicle will not be able to start.

u mean {G1201} Anti Theft Configuration

[Biggsy]

u mean {G1201} Anti Theft Configuration

Yes, you are right. Set that to "none"

Cheers,

[odd boy]

thanks guys