Flashscan to LM-2 Serial Cable

[TAQuickness]

Edit: LM-2 cables are now available for sale (http://forum.efilive.com/showthread.php?t=8741)

LM-2 ----> V2 RJ-12
Pin 1 -------> Pin 1
Pin 2 -------> Pin 2
Pin 3 or 4 ---> Pin 5
__________________________________________________ _______________
LM2 ----> V2 Serial Cable ----> V2 RJ-12
Pin 1 -------> Pin 2 ------------> Pin 1
Pin 2 -------> Pin 3 ------------> Pin 2
Pin 3 or 4 ---> Pin 5 ------------> Pin 5


Attached photo's:
1. V2, LM-2, and my prototype serial cable
2. LM-2 display indicating both WB channels are in E2 - No sensor
3. V2 displaying LM-2 channel 1
4. V2 displaying LM-2 channel 2
5. TAQ Cable sLM2 cable

[mr.prick]

are you making any for the LC-1?

[TAQuickness]

I'm strongly considering it ;)

[Chuck CoW]

LM-2 ----> V2 RJ-12
Pin 1 -------> Pin 1
Pin 2 -------> Pin 2
Pin 3 or 4 ---> Pin 5
__________________________________________________ _______________
LM2 ----> V2 Serial Cable ----> V2 RJ-12
Pin 1 -------> Pin 2 ------------> Pin 1
Pin 2 -------> Pin 3 ------------> Pin 2
Pin 3 or 4 ---> Pin 5 ------------> Pin 5


Attached photo's:
1. V2, LM-2, and my ghetto* serial cable
2. LM-2 display indicating both WB channels are in E2 - No sensor
3. V2 displaying LM-2 channel 1
4. V2 displaying LM-2 channel 2

*Supplies are on the way to make a handful of proper cables. 3 of which are spoken for. If you'd like one, please send me a PM.

Hey, you got the wire colors instaead of pin #'s?

Chuck CoW

[TAQuickness]

no sir. My gheto cable oringinated as a 10 pin Molex from a car alarm. Are you trying to fab an LM2 to LC1?

[Chuck CoW]

no sir. My gheto cable oringinated as a 10 pin Molex from a car alarm. Are you trying to fab an LM2 to LC1?

Nope, LM2 to V2.....

Chuck CoW

[odd boy]

on the LM2 side, how can I identify pin no. 1, 2, and 3?

http://i298.photobucket.com/albums/mm279/berginfuse/lm2.jpg

[joecar]

on the LM2 side, how can I identify pin no. 1, 2, and 3?

http://i298.photobucket.com/albums/mm279/berginfuse/lm2.jpgSee page 45 of LM-2 user manual (http://www.innovatemotorsports.com/support/manual/LM2_Manual_1.3.pdf)

the pin positions on the Molex plug are numbered.

[Suhail]

in page 45 they didn't point in a picture wich one is a RX and TX

4. Serial Out

Pin Use
1 RX
2 TX
3 GND
4 GND

how do i know which one is RX and TX

16940

[Omega_5]

As per the Molex datasheet;
Pin 1 - Upper left
Pin 2 - Upper right
Pin 3 - Lower left
Pin 4 - Lower right

http://www.molex.com/pdm_docs/ps/PS-43045.pdf

16941

[Tinbender59]

i see the thread!! doh!!!! :chair:

[markjj201]

I can get the afr info on the blue box but not on the computer log? what pid do i need to chose?

[Tinbender59]

Go to the bottom of the pid list, you will see analog wideband, and serial wideband. choose how you are hooked up, and look for #1 for your brand of WBO2 with AFR in the name.

[Tinbender59]

Look here also for the cable info
https://forum.efilive.com/showthread.php?9340-serial-port-cable-that-goes-to-v2&p=209448#post209448

[Highlander]

Digging this up... just to clarify...

from the LM2
Red Cable is Transfer
White Cable is Received
Blue and Black are ground

[zayne0]

where can i buy an lm-2 to v2 cable? ta quickness hasnt been on in a while.

[joecar]

where can i buy an lm-2 to v2 cable? ta quickness hasnt been on in a while.You have to either:
- insert a null-modem gender bender ($3.00),
- make your own cable.


See this thread: serial-port-cable-that-goes-to-v2 (https://forum.efilive.com/showthread.php?9340-serial-port-cable-that-goes-to-v2&p=209448#post209448)

[zayne0]

alright so i can simply go from the molex connector on my lm2 to the serial data input on my v2 correct? i seen the pics from page one just want to double check.

[MarkR8]

I have just connected mine and the wiring is as follows:
Molex RJ12
1 (red) Pin 1
2 (white) Pin 2
3 (Blue) Pin 5 or
4 (Black) Pin 5

[joecar]

I have just connected mine and the wiring is as follows:
Molex RJ12
1 (red) Pin 1
2 (white) Pin 2
3 (Blue) Pin 5 or
4 (Black) Pin 5Thanks.