Injector driver box

[AGRO]

Hi all, in the quest for more power i have hit a brickwall with the modified 60lb injector (modified to 84lb).

so i guess the next step is to fit a drive box and some low impedance bosch injectors.

which injector driver box is most reccomended? are there any implications or hints/tips with running one??

[AGRO]

Thanks for the input, much apreciated :confused:

[roy]

Might look into AEM or FJO low impedance injector drive boxes.
I have been researching for a piggy back system for my cossie to up grade to an 8 injector system and came across these.

[thunder550]

I have an Acceleronics VersaFueler driver and 96# injectors. Been running it for almost 2 years without a single issue. I would not hesitate to recommend this setup to anyone. :)

http://www.acceleronics.com/

[tazinhawaii]

I have the AEM box. Works great. But I too am interested in whether anyone changed and injector parameters due to the low impedance injectors (should open quicker).

Derrick

[wait4me]

You could just piggy back on a second 8 injectors like some companies do. Lingenfelter in indiana has done quite a few of the 16 injector conversions.

[WHYTRYZ06]

AGRO...how, did u modify the 60#ers to 84#ers???

[Dynotuner]

Any idea how low the injector resistance can get before the PCM drivers have an issue? I'm working with 160# set that I seem to recall to be around 10 ohm. IFR table pasted below and works better than you'd expect.
17.343750
17.648438
17.953125
18.250000
18.531250
18.789063
19.031250
19.250000
19.453125
19.625000
19.781250
19.914063
20.031250
20.140625
20.234375
20.312500
20.390625

[AGRO]

AGRO...how, did u modify the 60#ers to 84#ers???


they were drilled out then flow matched,

[WHYTRYZ06]

they were drilled out then flow matched,

who does that???