PDA

View Full Version : Ideas? Between reflashes I have to reboot laptop...



nitrorocket
August 21st, 2008, 02:53 PM
I fire up the laptop, plug in the flashscan, click on tune, read pcm, tune it, reflash and all is good. When I make a second set of changes it will kind of try to connect, almost gets there and then I get the pop up window that says cannot communicate with flashscan. The only way I can get it to reflash again is to shut down the program, turn off the laptop, and start all over again.

This makes tuning take a LOOOONG time.

Any ideas??

mr.prick
August 21st, 2008, 04:59 PM
look into your drivers or firewall.

GMPX
August 21st, 2008, 09:48 PM
Has anything changed on your set up from when you first started tuning?
New laptop, new Windows version? Are you using a V1 or V2?

Cheers,
Ross

P.S - How is the Chevelle going?

nitrorocket
August 24th, 2008, 02:16 AM
The v2 and laptop are new. I just finally kind of got it working but it does this. I will have to check the firewall.


I sold the Chevelle, but have a twin turbo GTO in the works. Wont be as crazy as the chevele, but will still make at least 750 rwhp on pump.

Bruce Melton
August 24th, 2008, 02:22 AM
Do you have both Scan and Tune open?