shakinlm7
August 26th, 2008, 11:51 AM
I've spent quite a bit of time logging and updating my VE table. It doesn't look like I can get it much better without my VE graph looking like crap. ( I was told its best not to have any lines crossing when looking at your VE graph in the 2D ) I've seen a few logs and a few dyno graphs where the AF looks MUCH better than mine.
I'm running clsd, I've considered reconnecting my MAF but dont know how to tune with the MAF. I've spent a couple hours searching/browsing so I know some people adjust the MAF calibration (b5001), some tune with the Injectors (B3701) and no one can agree on the right way to do it :secret: lol
Its just hard to know where to go from here.... Any advice would be Greatly appreciated!
The tune is set up for Logging VE BEN.
The log is a little In town driving and 1 WOT run 2-4 gear.
I'm running clsd, I've considered reconnecting my MAF but dont know how to tune with the MAF. I've spent a couple hours searching/browsing so I know some people adjust the MAF calibration (b5001), some tune with the Injectors (B3701) and no one can agree on the right way to do it :secret: lol
Its just hard to know where to go from here.... Any advice would be Greatly appreciated!
The tune is set up for Logging VE BEN.
The log is a little In town driving and 1 WOT run 2-4 gear.