PDA

View Full Version : Loggng MAF as Gram/sec. getting Lbs./min in Scan



Ninety8C5
August 31st, 2008, 10:34 AM
I've been trying to log MAF readings with my V2 (Boot 2.5.08, Firmware 2.5.20) in Grams/Sec., but I keep getting Lbs/Min. when I look at the Data in the Scan Tool.

I thought it was this line in the 'Options.ini' file:

PCM,MAF, AirFlow, 1, lb/m, /, 7.559873,

that was converting it, so I removed it from the file, downloaded the new file to the V2.

When I looked at the data in the V2 while logging it was Gram/Sec., but when I remove the log from the V2 and looked at it with the Scan Tool (Build 67), it shows Lbs/Min.

Am I doing something wrong or is there are problem with the units in Scan Tool? :nixweiss:

Ninety8C5
September 1st, 2008, 02:09 AM
I just looked at a log from a friend's car (also a 98 C5) that was done with the V1. In Excel (exported data) the MAF readings are in Grams/Sec., but when I open it in Scan Tool it is in Lbs./Min..

Any Ideas ?

TFZ_Z06
September 1st, 2008, 03:28 AM
I just looked at a log from a friend's car (also a 98 C5) that was done with the V1. In Excel (exported data) the MAF readings are in Grams/Sec., but when I open it in Scan Tool it is in Lbs./Min..

Any Ideas ?

Just go to the PID tab, right click and change it to metric.

Ninety8C5
September 1st, 2008, 05:20 AM
Just go to the PID tab, right click and change it to metric.

That was simple enough. :banana:


Now I can stop this. :bangin:

Thanks!