What to put in IFR table with boost referenced fuel pressure?

[PRAY]

I am going to start tuning a S10 with a roots type blown LSX swap. It has a boost/vacuum referenced fuel system. I need to know what to put in the IFR table since it doesn't have to compesate for the fuel/vacuum any more. I am assuming that it will be a solid number based on the base fuel pressure vs. injector size. Not the normal scaled up IFR table. Is this correct? Any help would be great.

[joecar]

That's correct, a single number for the whole IFR table...

Engine running, disconnect boost/vacuum reference hose, measure pressure at fuel rail, then calculate:

IFR = injector_rated_flowrate * sqrt(measured_rail_pressure / injector_rated_pressure)


Remember to reconnect reference hose.


More info: showthread.php?t=4821 (http://forum.efilive.com/showthread.php?t=4821)

[PRAY]

Thanks again Joe.