PDA

View Full Version : Help on upgrading to 8.1



8100 Power
September 28th, 2008, 03:27 PM
Ok. I've officially been at this for about 4 hours..:help2:

From reading all the instructions, my first step is to install the firmware and bootblock into the V2. But, my EFI Explorer is not connecting to my Flashcan. I can click the V2 and nothing happens, it still says "Device Not Connected".

It connects to my EFI v7.5 fine.

Fireware V: 2.4.72

Also, if I go to the upgrade v2 fireware in the 7.5 files, it says I have a boot block that is not compatible with the program, I must use EFI explorer.

I'm running Vista home premium.

mr.prick
September 28th, 2008, 04:09 PM
C:\Program Files\EFILive\Readme_First.pdf

If FlashScan has boot block V2.04.xx or earlier, please perform these steps:
1. Program firmware V2.04.72.
2. Use FlashScan’s menu option to upgrade the boot block to V2.05.08.
3. Program firmware V2.05.17(0519).
If FlashScan has boot block V2.05.xx (where xx is less than 08) please perform these steps:
1. Program boot block V2.05.08(0426).
2. Program firmware V2.05.17(0519).

8100 Power
September 28th, 2008, 04:34 PM
I updated the Bootblock. But now I can't get the flashscan out of DeallPoll. I've waited awhile also.. :(

8100 Power
September 28th, 2008, 04:42 PM
I updated the Bootblock. But now I can't get the flashscan out of DeallPoll. I've waited awhile also.. :(

Nevermine that.

I have Version 2.05.20

and Boot Block:

2.05.08.

Is this correct? Just wanting to be up-to date.

Everything is working so far!

mr.prick
September 28th, 2008, 05:02 PM
Nevermine that.

I have Version 2.05.20

and Boot Block:

2.05.08.

Is this correct? Just wanting to be up-to date.

Everything is working so far!

this is what i have installed and as far as i know, it is the latest.
here is the link to build 67 (scan.exe)
http://forum.efilive.com/showpost.php?p=76629&postcount=7

8100 Power
September 28th, 2008, 05:17 PM
Thanks for your help!

joecar
September 29th, 2008, 02:28 AM
8100, so you got it working...?

8100 Power
September 29th, 2008, 03:59 AM
8100, so you got it working...?

So far. I haven't attempted to flash or log yet. Gotta pick up a SD card! :grin:

joecar
September 29th, 2008, 04:07 AM
The 2GB SanDisk SD cards are about $5 on Amazon... look for the OEM/bulk pacakging, not the retail packaging.

8100 Power
September 29th, 2008, 04:33 AM
The 2GB SanDisk SD cards are about $5 on Amazon... look for the OEM/bulk pacakging, not the retail packaging.

Probably grab one at Walmart tomorrow. Don't wanna wait for the shipping..