PDA

View Full Version : Changing auto gearing



Qpred98
October 5th, 2008, 09:08 AM
Why does it only allow you to edit up to the tenths place instead of out to the hundreths place? I.E Changing the 4L60E gear ratios 1st 3.06, 2nd 1.75, 3rd 1.00, 4th 0.70 to the 4L80e's gearing.

The stock gearing show up as 1st. 3.1, 2nd 1.8, 3rd 1.0, 4th as .7

It will not let me do 1st. 2.4"8", 2nd 1.4"8", 3rd 1.0"0", 4th .7"5"

Am I over looking something?

Thanks guys.

Q

Never Mind! I found the button...INCREASE PRECISION

ScarabEpic22
October 5th, 2008, 09:11 AM
Select the cells you want to see in more detail and click the small "+" sign on the upper right hand side of the tune tool. It looks like this:
+
.00

This gives you more decimal places, my gearing goes from 3.06 to 3.059 by doing this (but Im a 4L60E).

Edit:
Haha, you just beat me to it man.

ChipsByAl
October 5th, 2008, 10:58 AM
Just for kicks, are you using a 4L60-E equipped file to run a 4L80-E in its place?
Al

Qpred98
October 5th, 2008, 11:37 AM
Just for kicks, are you using a 4L60-E equipped file to run a 4L80-E in its place?
Al


Yes...to an extent. I have a 1998 and I just need my speedo to be correct. I have the 4L80 converted to a full-manual valvebody. I'm going to attempt to use the stock pcm for lock up only at a certain mph and tps.

I used a stock 4l60e plug wired into the tranny's lock up solenoid.

I just need to see if I can indeed use EFI-live to get my TCC to lock up at 50mph and unlock at any throttle below say 16% or so. (Input much appreciated!)

I was able to do this with ls1edit to control a forged 347 with a vig3200 and TREX cam. Made traffic more bearable and no surging/bucking from the TCC.

ScarabEpic22
October 5th, 2008, 02:38 PM
Hmmm, didnt catch that one. You're going to probably need to do a segment swap to a 4L80E trans (and diagnostic) segment to get it to work properly...

Qpred98
October 12th, 2008, 12:08 PM
Trying to keep all of my threads pertaining to the 4L80 swap here.
Has anyone messed with the spark smoothing function when swapping from an auto to a manual? In my case, a manual valvebodied auto. use B5930 as reference. Thinking about utilizing this feature to help with the bucking associated with this trans swap.